How to Safely Protect Yourself From Arc Flash
Arc flash can be very dangerous and it is important to take the necessary precautions. The most important thing that you can do is to keep electrical panels and control devices dry and dirt-free. This will help reduce the chance of an arc flash. Another thing that you should do is to use a personal grounding device such as a grounding mat when working on live circuits, check for possible hazards such as damaged or worn insulation or cables before working on live circuits, and always shut off the power when making circuit repairs.
Arc flash is an extremely dangerous occurrence when high voltage electricity flows through the air near ground level due to a fault in an electrical circuit that causes a discharge of electric current in the form of light and heat.
What are the Top Causes of Arc Flash Incidents?
Arc flash incidents are one of the most hazardous electrical phenomena that can occur at any time, without warning.
Arc flash incidents are often the result of poor grounding, improper work practices, or an inadequate understanding of the electrical hazards present in a facility.
Arc flash accidents can also be caused by faulty equipment such as a damaged bushing on a switchgear, or by equipment that is not properly designed for use in hazardous areas.
In order to prevent arc flashes from occurring and causing injury or death, it is critical that those working with high voltage be aware of their surroundings and adhere to safety precautions accordingly.
What are Some of the Dangers of Arc Flash
Arc flash is a term used to describe the electric arc that jumps between two points. The metal-to-metal contact of the two points usually results in an electric arc. The electrical current can be as high as 30,000 amps and the voltage is usually around 10,000 volts.
Arc flash can be dangerous because it can lead to death or serious injury. If you are close enough to the point where the arc occurs, then your clothes might catch fire or you may suffer burns to your skin.
Some of the dangers of Arc Flash are:
– Arc Flash interrupts power supply
– Arc Flash may cause fires
– Rapidly increases in temperature at point of contact
—
If you’d like to learn more about Arc Flash Safety Training, or if you need training content for your next safety meeting, go ahead and review our free training demo about Arc Flash Safety.
